JS/JP/JC
 
JS
JP
JC
Power Supply Voltage
10 V DC ÷ 30V DC
Max. Current Absorption 60mA + output load (max 2.5A) 60mA + output load (max 10A) 60mA + output load (max 1.4A)
Working Temperature Range
-20° ÷ +60° C
Output Signals

3 analog signals
Range 0 ÷ 5V,
0 ÷ 10V,
radiometric (Danfoss)
Imax: 10mA

6 directional outputs
1 DUMP VALVE output
1 FAULT output

Imax: 300mA (for each output)

8 2.5A power outputs usable as:

3 PWM pairs
1 BYPASS output
1 FAULT output

-or-

1 PWM output
6 ON/OFF directional outputs
1 DUMP VALVE output

PWM outputs:
Imin: 100 ÷ 2500mA
Imax: 100 ÷ 2500mA
Freq: 50 ÷ 300Hz

CANH - CANL
CAN 2.0B
up to 1Mbps

1 ON/OFF output controllable via CAN
700mA max.

1 output for push button power supply voltage (5V DC stabilized)
Imax: 30mA (usable also as 700mA ON/OFF output)
Input Signals

1 ON/OFF input usable as:

  • speed selection input
  • movement enabled (dead man switch)
  • X or Y axis commutation to the Z axis

If not used, FAULT and BYPASS outputs can be used as ON/OFF inputs (they are bidirectional signals).

Via CAN transmittable:

  • 2 ON/OFF inputs (one usable as pickup input)
  • 5 analog inputs, range 0V ÷ 4.5V 2.5 V centered, usable to read 5 push buttons or 10 bilateral buttons. (two usable as 4-20mA analog inputs).
Thumbweel Input Signal
Range: 0.5V ÷ 4.5V
Analog Input Impedance
-
-
 11kOhm towards 2.5V
Connections Molex minifit Jr. 14 poles with 50cm cable

Molex minifit JR. 4 poles with 50cm cable (CAN and power supply)

Molex minifit Jr. 10 poles with 50cm cable for optional inputs/outputs.

Under Panel Size
Diameter 80mm - Depth 90mm
Working Angle
+/- 18°
Max. Force on Handle
800N
Electromagnetic Compatibility (EMC)
According EN 13309 and EN ISO 14982 regulations
Ingress Protection Rating
IP65 (IP40 with thumbwheel)
PUSH BUTTON POSITION AND THUMWHEEL CODIFICATION