FSI/RD
Power Supply Voltage 10V DC ~ 30V DC
Max. Current 1A (resistive)
Ambient operating temperature -20 °C ~ +80 °C
Protection degree IP65 (IP67 on request)
Commutation angle 15°
Fitting adjustment
+/- 16°
Dimension
80 x 125 x 33 (mm)
Weight
 220g
Clamping bracket
1.8mm thickness galvanized iron plate 12µm resitant to salty smoke meeting UNI ISO 4520 requirements.
Sensor
 incapsulated into epoxy resin
Connector
 DIN 43650 type with 3 poles + ground

FITTING
The device gives a positive voltage signal on one of the connector poles depending on the indication and the corresponding LED switches on. Mount on vertical plate. Max. deviation from the vertical allowed is 5°. The sensor with electric contact can be mounted on bracket with left or right output. Turn always the connector with bottom output. See pictures.
DISASSEMBLY AND SCRAPPING
The slope sensor contains mercury (Hg). In case of product disassembly and/or scrapping, it is necessary to contact the installer or an authorised dismantler. The same will correctly dispose of mercury following laws in force.